Salice Tilt Up for Flush Recessed Assembly with Cover｜ Other Products

The Salice Tilt Up is a compact and discreet lift system for upward-opening wooden flap doors. This version is designed for flush recessed assembly with cover, allowing the mechanism to be set neatly into the cabinet side and finished with a cover for a clean, integrated appearance.
With a mechanism thickness of only 12mm, or 13.5mm with cover, Tilt Up is ideal for high-end cabinet designs where minimal visible hardware and precise movement are required. The system offers controlled decelerated closing, adjustable spring strength and 3-way door adjustment for accurate alignment and smooth operation.
Key Features

For upward-opening wooden flap doors
Flush recessed assembly with cover
Compact concealed mechanism
12mm mechanism thickness
13.5mm overall thickness with cover fitted
Suitable for door thicknesses from 18mm to 30mm
15mm machining depth required on the door
80° opening with limiter fitted
95° opening with limiter disengaged
Decelerated closing for controlled movement
Adjustable spring strength
3-way door adjustment for precise door alignment
Suitable for side panel fixing
Available in Nickel-plated or Titanium system finishes

Cover kits available in a choice of finishes
Cover Finishes

Signal White – RAL 9003
Silk Grey – RAL 7044
Desert Taupe
Dusty Grey – RAL 7037
Metal Black
Traffic Black – RAL 9017

Technical Information
The Salice Tilt Up system is suitable for wooden flap doors with upward opening and side panel fixing. It can be used for external, recessed or flush recessed applications. This listing is for the flush recessed assembly with cover version.
Door thickness must be between 18mm and 30mm, with 15mm machining depth required on the door.
The flush recessed version requires machining into the cabinet side panel and should be checked against the Salice technical drawings before ordering or installation.
Kit Contents
The Tilt Up system pack includes:

1 right-hand system
1 left-hand system
Fixing screws

The flush recessed assembly cover kit includes:

2 plates
2 system covers
2 door fixing bracket covers
Fixing screws

Adjustment

Spring strength adjustment
Decelerating force adjustment
Height adjustment: ±2mm
Sideways adjustment: ±1.2mm
Depth adjustment: 0mm to +3mm

Please note: Spring strength should be selected according to the door height and weight using the Salice strength charts. Always check the required machining, cabinet dimensions and cover finish before ordering to ensure the system is suitable for your application.
Brand:SaliceSKU:S05KTUFRA1MBTTags:Tilt, Tilt UpSystem Strength (please refer to the charts):Strength 1, Strength 2, Strength 3, Strength 4Cover Finish:Metal Black, Signal White, Desert Taupe, Dusty Grey, Silk Grey, Traffic BlackMechanism Finish:Titanium, Nickel